MS010C.SDD2.AD0904.SD25    
Requesting FW Pkg ver ........ 
 
Collecting Sys Files information...
  ID        Len
===============
   0          2  Reserved Defect Table (SA defect table)
   1          2  Drive Information File (DIF)
   2         16  Performance Parameter File (PPF)
   3       1880  Primary Defect File (P-List))
   4          9  Servo Adaptive Parameter File (SAP)
   5          4  Manufacturing Information File (MIF)
   6         66  Read Adaptive Parameters File (RAP)
   7          1  Controller Adaptive Parameters File (CAP)
   8       2400  
   9          1  SMART Configuration File
   A       2251  SMART Data File
   B       1000  
   C      64000  Serial Port Test Results File (Self Scan Log)
   D        160  
   E        432  Data Integrity Check (DIC), HEAD 0
   F        223  DIC Dummy File
  13          8  Disc Registry File (settings, security, etc)
  15        100  BGMS File (Directed Offline Scan)
  16          2  
  17         40  
  19         24  Log File
  1A         33  Log File
  1B          1  Log File
  1C          9  
  1D        128  Physical Overlay File 0
  1E        128  Physical Overlay File 1
  1F        640  Physical Overlay File 2
  22         80  Drive Self Test (DST), Head 0
  23         80  Drive Self Test (DST), Head 1
  24         80  Drive Self Test (DST), Head 2
  25         80  Drive Self Test (DST), Head 3
  26         80  Drive Self Test (DST), Head 4
  27         80  Drive Self Test (DST), Head 5
  28         80  Drive Self Test (DST), Head 6
  29         80  Drive Self Test (DST), Head 7
  2A          9  Saved Mode Pages (HDD settings)
  2B        579  R/W Operating Parameters (translator, etc)
  2C        432  Data Integrity Check (DIC), HEAD 1
  2D        432  Data Integrity Check (DIC), HEAD 2
  2E        432  Data Integrity Check (DIC), HEAD 3
  2F        432  Data Integrity Check (DIC), HEAD 4
  30        432  Data Integrity Check (DIC), HEAD 5
  31        432  Data Integrity Check (DIC), HEAD 6
  32        432  Data Integrity Check (DIC), HEAD 7
  33       4576  
  34        640  Packed CONGEN XML definition
  35         26  SMART Data
Collecting Sys File Infos completed
 
Collecting DT Infos...
ROM:
  ID     MemOffs        Len
===========================
   0     6020100      33792  Read Adaptive Parameters File (RAP)
   1     6020000        256  Controller Adaptive Parameters File (CAP)
   4     4001000       4096  Servo Adaptive Parameter File (SAP)
         602BE00       4096
              total    8192
   5       6C000      81920  Servo Firmware Table
   8    10070000        948  
   A     60A5320       1024  Seek Profile
  12    100D4000        104  
  13     60B05D4        544  Dependent Zone Table for User Area
  14     60B07F4         64  Dependent Zone Table for System Area
  15           0     524288  Flash ROM
  1B     60AF8FC       3288  Dependent Zone Group Tables for User Area
  1C     60AF7BC        320  Dependent Zone Group Tables for System Area
  1D     60201A0        208  VBAR Configuration File
  1E     6020390       2320  Zone Format Parameters File
 
RAM:
  ID     MemOffs        Len
===========================
   0     6020100      33792  Read Adaptive Parameters File (RAP)
   1     6020000        256  Controller Adaptive Parameters File (CAP)
   2     6020270        288  Zone Table
   4     4001000       4096  Servo Adaptive Parameter File (SAP)
         602BE00       4096
              total    8192
   5       6C000      81920  Servo Firmware Table
   6      1FDC40      40996  Servo Flaw Table
   8    10070000        948  
   A     60A5320       1024  Seek Profile
  12    100D4000        104  
  13     60B05D4        544  Dependent Zone Table for User Area
  14     60B07F4         64  Dependent Zone Table for System Area
  15           0     524288  Flash ROM
  16     6020100         32  Drive Configuration Table
  17     6021690       1744  Temperature Control Configuration
  1B     60AF8FC       3288  Dependent Zone Group Tables for User Area
  1C     60AF7BC        320  Dependent Zone Group Tables for System Area
  1D     60201A0        208  VBAR Configuration File
  1E     6020390       2320  Zone Format Parameters File
  1F     614463C       1224  RW working user preamp table
  20     6144B04         72  RW working system preamp table
 
Collecting DT Infos completed
 
Detecting Phys Sct Size...
Result.................................. : 512


Test  : Reading modules


Test  : Reading modules
Reading modules to profile folder
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\F3 Arch (common)\ST3500820AS-SD25-9QM0PH6F\Data\ModDir\

Module 0000, Reserved Defect Table (SA defect table).................. : Ok
Module 0001, Drive Information File (DIF)............................. : Ok
Module 0002, Performance Parameter File (PPF)......................... : Ok
Module 0003, Primary Defect File (P-List))............................ : Ok
Module 0004, Servo Adaptive Parameter File (SAP)...................... : Ok
Module 0005, Manufacturing Information File (MIF)..................... : Ok
Module 0006, Read Adaptive Parameters File (RAP)...................... : Ok
Module 0007, Controller Adaptive Parameters File (CAP)................ : Ok
Module 0008........................................................... : Ok
Module 0009, SMART Configuration File................................. : Ok
Module 000A, SMART Data File.......................................... : Ok
Module 000B........................................................... : Ok
Module 000C, Serial Port Test Results File (Self Scan Log)............ : Ok
Module 000D........................................................... : Ok
Module 000E, Data Integrity Check (DIC), HEAD 0....................... : Ok
Module 000F, DIC Dummy File........................................... : Ok
Module 0013, Disc Registry File (settings, security, etc)............. : Ok
Module 0015, BGMS File (Directed Offline Scan)........................ : Ok
Module 0016........................................................... : Ok
Module 0017........................................................... : Ok
Module 0019, Log File................................................. : Ok
Module 001A, Log File................................................. : Ok
Module 001B, Log File................................................. : Ok
Module 001C........................................................... : Ok
Module 001D, Physical Overlay File 0.................................. : Ok
Module 001E, Physical Overlay File 1.................................. : Ok
Module 001F, Physical Overlay File 2.................................. : Ok
Module 0022, Drive Self Test (DST), Head 0............................ : Ok
Module 0023, Drive Self Test (DST), Head 1............................ : Ok
Module 0024, Drive Self Test (DST), Head 2............................ : Ok
Module 0025, Drive Self Test (DST), Head 3............................ : Ok
Module 0026, Drive Self Test (DST), Head 4............................ : Ok
Module 0027, Drive Self Test (DST), Head 5............................ : Ok
Module 0028, Drive Self Test (DST), Head 6............................ : Ok
Module 0029, Drive Self Test (DST), Head 7............................ : Ok
Module 002A, Saved Mode Pages (HDD settings).......................... : Ok
Module 002B, R/W Operating Parameters (translator, etc)............... : Ok
Module 002C, Data Integrity Check (DIC), HEAD 1....................... : Ok
Module 002D, Data Integrity Check (DIC), HEAD 2....................... : Ok
Module 002E, Data Integrity Check (DIC), HEAD 3....................... : Ok
Module 002F, Data Integrity Check (DIC), HEAD 4....................... : Ok
Module 0030, Data Integrity Check (DIC), HEAD 5....................... : Ok
Module 0031, Data Integrity Check (DIC), HEAD 6....................... : Ok
Module 0032, Data Integrity Check (DIC), HEAD 7....................... : Ok
Module 0033........................................................... : Ok
Module 0034, Packed CONGEN XML definition............................. : Ok
Module 0035, SMART Data............................................... : Ok
Modules reading process completed


Test  : Reading modules


Test  : DT reading
Reading DT to profile folder
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\F3 Arch (common)\ST3500820AS-SD25-9QM0PH6F\Data\CPDir\

DT 0000 (Flash ROM), Read Adaptive Parameters File (RAP).............. : Ok
DT 0001 (Flash ROM), Controller Adaptive Parameters File (CAP)........ : Ok
DT 0004 (Flash ROM), Servo Adaptive Parameter File (SAP).............. : Ok
DT 0005 (Flash ROM), Servo Firmware Table............................. : Ok
DT 0008 (Flash ROM)................................................... : Ok
DT 000A (Flash ROM), Seek Profile..................................... : Ok
DT 0012 (Flash ROM)................................................... : Ok
DT 0013 (Flash ROM), Dependent Zone Table for User Area............... : Ok
DT 0014 (Flash ROM), Dependent Zone Table for System Area............. : Ok
DT 0015 (Flash ROM), Flash ROM........................................ : Ok
DT 001B (Flash ROM), Dependent Zone Group Tables for User Area........ : Ok
DT 001C (Flash ROM), Dependent Zone Group Tables for System Area...... : Ok
DT 001D (Flash ROM), VBAR Configuration File.......................... : Ok
DT 001E (Flash ROM), Zone Format Parameters File...................... : Ok
DT 0000 (RAM), Read Adaptive Parameters File (RAP).................... : Ok
DT 0001 (RAM), Controller Adaptive Parameters File (CAP).............. : Ok
DT 0002 (RAM), Zone Table............................................. : Ok
DT 0004 (RAM), Servo Adaptive Parameter File (SAP).................... : Ok
DT 0005 (RAM), Servo Firmware Table................................... : Ok
DT 0006 (RAM), Servo Flaw Table....................................... : Ok
DT 0008 (RAM)......................................................... : Ok
DT 000A (RAM), Seek Profile........................................... : Ok
DT 0012 (RAM)......................................................... : Ok
DT 0013 (RAM), Dependent Zone Table for User Area..................... : Ok
DT 0014 (RAM), Dependent Zone Table for System Area................... : Ok
DT 0015 (RAM), Flash ROM.............................................. : Ok
DT 0016 (RAM), Drive Configuration Table.............................. : Ok
DT 0017 (RAM), Temperature Control Configuration...................... : Ok
DT 001B (RAM), Dependent Zone Group Tables for User Area.............. : Ok
DT 001C (RAM), Dependent Zone Group Tables for System Area............ : Ok
DT 001D (RAM), VBAR Configuration File................................ : Ok
DT 001E (RAM), Zone Format Parameters File............................ : Ok
DT 001F (RAM), RW working user preamp table........................... : Ok
DT 0020 (RAM), RW working system preamp table......................... : Ok
DT reading process completed


Test  : Read ROM

Reading ROM to profile folder
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\F3 Arch (common)\ST3500820AS-SD25-9QM0PH6F\Data\ROM\
Result............................................ : Ok


Test  : Read ROM

Reading ROM to DB
Folder: <root>/Seagate F3 Architecture/F3 Arch (common)/ST3500820AS SD25 9QM0PH6F/ROM
Result............................................ : Ok


Test  : Reading modules


Test  : Reading modules
Reading modules to DB
Folder: <root>/Seagate F3 Architecture/F3 Arch (common)/ST3500820AS SD25 9QM0PH6F/ModDir

Module 0000, Reserved Defect Table (SA defect table).................. : Ok
Module 0001, Drive Information File (DIF)............................. : Ok
Module 0002, Performance Parameter File (PPF)......................... : Ok
Module 0003, Primary Defect File (P-List))............................ : Ok
Module 0004, Servo Adaptive Parameter File (SAP)...................... : Ok
Module 0005, Manufacturing Information File (MIF)..................... : Ok
Module 0006, Read Adaptive Parameters File (RAP)...................... : Ok
Module 0007, Controller Adaptive Parameters File (CAP)................ : Ok
Module 0008........................................................... : Ok
Module 0009, SMART Configuration File................................. : Ok
Module 000A, SMART Data File.......................................... : Ok
Module 000B........................................................... : Ok
